Everything I've figured out the hard way — written down so you don't have to go through it too.
Gaps between lines, see-through walls, a clicking extruder: under-extrusion has six causes and they're easy to tell apart. Work the list.
First layer won't stick? Here are the five causes in order of likelihood — and the one habit that keeps the problem from coming back.
A print that dies at hour 9 leaves evidence. Spaghetti, a shifted layer, a clean stop: each points to a different cause. Here's how to read it.
PETG promises strength and delivers blobs, strings, and torn-up build plates until you stop printing it like PLA. Here are settings that work.
Your first layer tells you exactly what's wrong, if you know how to read it. Dial in Z-offset, fix elephant's foot, and stop re-leveling.
Spider webs between every part of your print? Stringing comes down to four causes. Here's how to fix them in order, with real retraction numbers.
Heat not working? 7 checks for Florida heat pumps, electric strip heat, and gas furnaces before you call a tech.
AC running but the house won't cool? Work through these 8 simple checks before paying for a service call — from a former Florida HVAC contractor.
Ice on your AC? Here's why an evaporator coil freezes, how to thaw it safely, and what to check before calling a tech.
AC shut off and won't restart? In Florida it's often a clogged condensate drain line. Here's how to find and clear it in about 15 minutes.
How a senior project deadline turned me into a maker — and why I built a tool to track every print setting automatically.